Table of Contents
Advertisement
Crestron Adagio™ AES
Name Rooms
Name Sources
Operations Guide – DOC. 6456B
This screen allows you to customize the name of each room displayed on the LCD.
•
Open Installer Tools as described on page 24, select Name Rooms, and
press the ENTER button.
Name Rooms
Select Room to Name
SOURCE
1: Room 1
ROOM
2: Room 2
3: Room 3
HOUSE
MENU
•
Turn the selection knob to select the room to be named and press the soft
button labeled Edit (or press the ENTER button). To cancel and return to
the Installer Tools menu, press MENU.
•
To use one of the factory-installed names, turn the selection knob clockwise
or counterclockwise to display the desired room name and press ENTER.
•
To enter a custom name, turn the selection knob until [Custom Name] is
displayed and press ENTER.
Edit Room Name
Enter Name for Room 1
SOURCE
1: Room 1
ROOM
2: Room 2
3: Room 3
HOUSE
MENU
Del
⇒ Select letters (upper and lower-case), numbers, or other characters by
turning the selection knob until the desired letter, number, or other
character is displayed on the LCD. Move the cursor to another position
by pressing the soft buttons labeled
press the soft button marked Del.
NOTE: The maximum length for any room name is 16 characters.
⇒
After entering the new room name, press Done to save the name and
return to the list of room names.
•
If all of the rooms have been named/renamed, press MENU to return to the
Installer Tools menu.
This screen allows you to customize the name of each source displayed on the LCD.
•
Open Installer Tools as described on page 24, select Name Sources, and
press the ENTER button.
Entertainment System
Edit
<
>
Done
and
. To delete a character,
Entertainment System: Adagio AES • 27
BKLT
SCHED
DISPLAY
MORE
BKLT
SCHED
DISPLAY
MORE
Hide quick links:
Advertisement
Table of Contents
