Table of Contents
Advertisement
Crestron Adagio™ AES
Restore Default Settings
Operations Guide – DOC. 6456B
•
Turn the selection knob to select the button to be mapped and press the
ENTER button or the soft button labeled Edit. To cancel and return to the
Installer Tools menu, press MENU.
Select Source for Button and Button Layout
Select Src. For Button 1
SOURCE
Btn1: [S1 AM/FM]
ROOM
Btn2: S1 XM
Btn3: Source 3
HOUSE
MENU
BUTTON 1
BUTTON 3
BUTTON 5
•
Select the source for the button by turning the selection knob until the
desired source is displayed on the LCD. If a button is not to be used, select
Not Used.
•
After selecting the source, press the ENTER button to save the assignment
and return to the list of buttons. If all of the buttons have been
assigned/reassigned, press MENU to return to the Installer Tools menu.
The AES can be restored to its default factory settings from the front panel. All
settings that have been made with Installer Tools, as well as room and source audio
settings will be reset to their factory defaults.
•
Open Installer Tools as described on page 24, select Restore Defaults, and
press the ENTER button.
Restore Defaults Warning
Restore Defaults:
SOURCE
ROOM
room/source audio settings
HOUSE
MENU
Yes
Entertainment System
BUTTON 2
BUTTON 4
BUTTON 6
All Installer Mode and
will be reset. Continue?
No
Entertainment System: Adagio AES • 31
BKLT
SCHED
DISPLAY
MORE
BKLT
SCHED
DISPLAY
MORE
Hide quick links:
Advertisement
Table of Contents
