Crestron Adagio AES Operation Manual page 30

Entertainment System
Set the Number of Rooms
26 • Entertainment System: Adagio AES
Configure Network
Configure Network
SOURCE
ROOM
HOUSE
Yes
MENU
•
To install a CEN-IDOC, press the soft button labeled Yes and follow the
instructions onscreen. Otherwise, press the soft button labeled No. The
name of the CEN-IDOC will be used in place of "Source 5" in the list of
sources.
•
To install an AAS, press the soft button labeled Yes and follow the
instructions onscreen. Otherwise, press the soft button labeled No. The
source names will be renamed as follows:
⇒
Source 7 becomes "Server 1"
⇒
Source 8 becomes "Server 2"
⇒
Source 9 becomes "Server 3"
⇒
Source 10 becomes "Server 4"
1: AAS-2 model
2: AAS-4 model
NOTE: When installing an AAS, only one AAS can be present on the
network.
•
Press MENU to return to the Installer Tools menu.
Set the number of rooms so the AES does not display unused rooms during
configuration and operation.
•
Open Installer Tools as described on page 24, select Set Number of
Rooms, and press the ENTER button.
Set the Number of Rooms
Set the Number of Rooms
SOURCE
Select the number of
ROOM
Rooms that you will
HOUSE
be using:
MENU
•
Use the selection knob to select the number of rooms. To cancel and return
to the Installer Tools menu, press MENU.
•
To confirm, press the ENTER button and return to the Installer Tools
menu.
Crestron Adagio™ AES
Do you want to install
a CEN-IDOC in your
system?
No
1,2
1,2
2
2
6
Operations Guide – DOC. 6456B
BKLT
SCHED
DISPLAY
MORE
BKLT
SCHED
DISPLAY
MORE