Room Mode - Crestron Adagio AES Operation Manual

Crestron Adagio™ AES
Select a Room
Control a Room
Operations Guide – DOC. 6456B

Room Mode

Room mode is used to select and control a room that is connected to the AES. If a
room button LED is on, then the room is connected to an audio source. If a room
button LED is off, then the room is turned off.
To select a room:
•
Press Room to put the AES in the Room mode. The current selected room
is displayed on the LCD.
Room Mode
SOURCE
ROOM
HOUSE
MENU
Control
•
Turn the selection knob until the desired room is displayed on the LCD.
Alternatively, press a room button on the AES or AAE (if connected).
After a room is selected, a source can be selected, the room can be turned "off",
room and global volume can be adjusted, or the room output can be muted.
•
Select a source by pressing the soft button labeled Source and turning the
selection knob until the desired source is displayed on the LCD. Press the
ENTER button to select the source. Press the soft button labeled Control
(if available) to control the source. Press the MORE button to view options
for adjusting audio parameters (bass, treble, balance, and loudness).
•
Turn on the room by pressing the soft button labeled On.
•
Turn off the room by pressing the soft button labeled Off.
•
Adjust the room's volume by turning the volume knob. The volume level
will be displayed on the LCD.
•
Adjust the volume in all rooms that are on by pressing the soft button
labeled Global and turning the volume knob. The global volume level will
be displayed on the LCD. Press MENU to return to the room menu.
Adjusting the global volume adjusts the volume in every room that is
currently turned on. The volumes are adjusted proportionately so the room
volume levels do not jump to the same level when the global volume
control is used.
Entertainment System
Room 1
S1 AM/FM
Source Global Off
Entertainment System: Adagio AES • 59
BKLT
SCHED
DISPLAY
MORE