Crestron Adagio AES Operation Manual page 39

Crestron Adagio™ AES
Set Mono or Stereo Mode
Operations Guide – DOC. 6456B
The audio sent to the speakers in each room can be set for either stereo or mono.
When set to stereo, the audio signal is separated into left and right channels for
distribution to left and right speakers. When set to mono, the audio signal is
combined into one signal for use in larger rooms where stereo separation is not
practical. The mono/stereo settings of each room can be adjusted independently.
•
Access the Room Setup mode as described on page 33.
•
Press the soft button labeled Mono to open the Stereo/Mono control.
Stereo/Mono Control
SOURCE
ROOM
HOUSE
MENU
•
The selected mode is underlined on the lower-right side of the LCD. Press
the soft button labeled Stereo to select the stereo mode. Press the soft
button labeled Mono to select the mono mode.
NOTE: Other rooms can be adjusted by pressing a different room button.
•
Press MENU to return to the Room Setup menu.
Entertainment System
Room 3
Stereo/Mono
Stereo Mono
Entertainment System: Adagio AES • 35
BKLT
SCHED
DISPLAY
MORE