Crestron Adagio AES Operation Manual page 15

Crestron Adagio™ AES
Operations Guide – DOC. 6456B
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
2 ENTER BUTTON
3 STANDBY BUTTON
4 LABEL ACCESS
5 HARDWARE RESET
6 SOFTWARE RESET
7 LABEL STRIP COVER
8 SOURCE BUTTON
9 ROOM BUTTON
10 HOUSE BUTTON
11 MENU BUTTON
12 ROOM BUTTONS
13 LIQUID CRYSTAL
DISPLAY
14 SOFT BUTTONS
(Continued on following page)
Entertainment System
DESCRIPTION
The ENTER button confirms changes
made to AES settings.
The STANDBY button places the unit in
Standby. The button is lit when the AES is
in use. When in Standby, the button will
not be lit, all switching connections are
broken, and all of the amplifier and pre-
amplifier outputs are powered off. Turning
on a room turns on the AES.
A notch in the front panel allows removal
of the label cover (and access to the USB
port, # 15) with a flat-head screwdriver.
Recessed below the front panel. Press
this button to initiate a system hardware
reset. This has the same effect as
disconnecting and reconnecting power.
Recessed below the front panel. Press
this button while the system is running to
restart the program without rebooting the
processor. Hold during reboot to bypass
the custom program and run the built-in
out-of-the-box functionality.
Covers the engraved label strip and the
USB port (#15).
The SOURCE button places the AES in
the Source mode.
The ROOM button places the AES in the
Room mode.
Functions controlled by the HOUSE button
are determined in a custom program
created by SystemBuilder.
The MENU button returns the display
(#13) to the previous screen.
Room buttons select and indicate the
room(s) controlled by the AES. Room
buttons also indicate rooms contained in a
room group.
The Liquid Crystal Display (LCD) shows
system information such as audio controls,
tuner controls, and room controls.
Function of soft buttons are dependent on
operation of AES.
Entertainment System: Adagio AES • 11