Configure Sources; Configure Rooms - Crestron Adagio AMS Operation Manual

Media System
Access the Room Setup
Mode
58 • Media System: Adagio AMS

Configure Sources

The gain of each analog source and the theater downmix can be customized from the
AMS control panel.
To adjust a source's gain:
•
Select a source to adjust by pressing SOURCE and using the selection
knob to select a source.
•
Press and hold the SOURCE and MORE buttons at the same time to open
the Gain control. The soft button labels will change to show the available
control option.
Source Setup Menu
SOURCE
ROOM
HOUSE
MENU
•
Adjust the gain level with the selection knob. Turn clockwise to raise the
gain level or counterclockwise to lower the gain level. Press the soft button
labeled Reset to set the gain level to 0dB.
•
Press MENU to exit.

Configure Rooms

The sound quality, minimum volume, maximum volume and startup volume settings,
of each room can be customized from the AMS control panel.
•
Select a room to configure by pressing a room button. Alternatively, press
ROOM and select the room with the selection knob.
•
Press and hold the ROOM and MORE buttons at the same time for
approximately five seconds to open the Room Setup menu. The soft button
labels will change to show the available control options.
Room Setup Menu
SOURCE
ROOM
HOUSE
MinV
MENU
Parameters that can be adjusted include:
⇒ Minimum Volume
⇒ Maximum Volume
Crestron Adagio
iPod
Gain 0dB
Reset
Room 3
Select Parameter
to Adjust
MaxV StartV Mono
Operations Guide – DOC. 6509B
®
AMS
SURRND
THEATER
DISPLAY
MORE
SURRND
THEATER
DISPLAY
MORE