Table of Contents
Advertisement
Entertainment System
Restore Factory Settings
Adjust the Gain of a Source
Access the Room Setup
Mode
30 • Entertainment System: Adagio AES
This screen allows you to restore the AES to its factory default settings.
•
Open Installer Tools as described on page 23, select Restore Factory
Settings, and press the ENTER button. All audio settings, room names,
sources names, keypad button assignments, and the tuner region will be
reset to factory defaults. Ethernet settings will not be reset.
•
Follow the onscreen instructions for restoring the factory default settings.
Configure Sources
The gain of each source can be customized from the AES control panel.
To adjust a source's gain:
•
Select a source to adjust by pressing SOURCE and using the selection
knob to select a source.
•
Press and hold the SOURCE and MORE buttons at the same time to open
the Gain control. The soft button labels will change to show the available
control option.
Source Setup Menu
SOURCE
ROOM
HOUSE
MENU
•
Adjust the gain level with the selection knob. Turn clockwise to raise the
gain level or counterclockwise to lower the gain level. Press the soft button
labeled Reset to set the gain level to 0dB.
•
Press MENU to exit.
Configure Rooms
The sound quality, minimum volume, maximum volume and startup volume settings,
of each room can be customized from the AES control panel.
•
Select a room to configure by pressing a room button. Alternatively, press
ROOM and select the room with the selection knob.
•
Press the ROOM and MORE buttons at the same time to open the Room
Setup menu. The soft button labels will change to show the available
control options.
Crestron Adagio™ AES
iPod
Gain 0dB
Reset
Operations Guide – DOC. 6456A
BKLT
SCHED
DISPLAY
MORE
Advertisement
Table of Contents
