Set Mode Items - Icom iM87 Instruction Manual

8
SET MODE

■ Set mode items

D Beep tone function "bP"
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound
at the push of a switch. When ON is selected, a fixed beep
(Pi) sounds and when US is selected, the preset beeps (e.g.
do, re, mi) sound.
Beep tone ON (default)
D Priority scan function "Pr"
The transceiver has 2 scan types—normal and priority scans.
Normal scan searches all TAG channels in the selected
channel group. Priority scan searches all TAG channels in se-
quence while monitoring Channel 16.
Normal scan (default)
18 18
PUSH
User Beep
PUSH
Priority scan
D Scan resume timer "St"
The scan resume timer can be set as a pause (OFF) or timer
scan (ON).
• OFF : When a signal is detected on a channel, scan pauses
on the channel until the signal disappears, and then
resumes.
• ON : When a signal is detected on a channel, scan pauses
on the channel for 5 sec., and then resumes.
PUSH
Scan resume timer OFF
(default)
D Auto scan function "AS"
The Auto scan function starts the desired scan automatically
when no signal is received, or no operation is performed for
30 sec.
PUSH
Auto scan OFF (default)
Scan resume timer ON
Auto scan ON