Sim2 Multimedia SpA User Manual page 18

K), Low (circa 5000 degrees K).
The User option will allow you to select the colour temperatu-
re of your choice.
COLOR TEMP. /USER
RED
GREEN
BLU
Gamma correction
Selects the Gamma's correction curve. It determines the
projector's response to the grey scale, emphasizing - more or
less - the different grades of brightness (blacks, dark, medium,
light greys, whites) in the projected image.
GAMMA CORRECTION
FILM
VIDEO
GRAPHICS
Y / C Delay
Use this adjustment in the event of horizontal colour misalignment
within the projected image. It is recommended that a colour bar
test pattern be used for this adjustment.
MAGNIFICATION
Use this adjustment to magnify the projected image (please
note the higher the magnification the poorer the quality of the
image).
Adjust the level of enlargement using the Left and Right
Arrow (the magnifying lens icon
of the image).
18
0
-16
28
will appear at the centre
Select Pan (zoom button on the remote control) to choose
the area of image to enlarge, using all four arrow keys.
Via remote control, it is possible to alternate between modes,
by pressing the key.
SETUP
The installation menu gives access to features that will allow
for correct installation of the projector.
SETUP
ORIENTATION
KEYSTONE
PROJECTION LENS
TEST PATTERNS
FACTORY DEFAULTS