Configuring Network Settings
Installing the IP Utility
Uninstalling the IP Utility
32
Note
For optimum system performance, we recommend that you ensure your
system requirements are above these minimum configurations.
Note
You must have Windows administrator privileges to the work station on which
the Honeywell IP Utility is being installed.
To install the IP Config Tool
1.
Insert the product CD into your CD-ROM drive. The Honeywell IP Utility InstallShield
wizard displays.
OR
If the InstallShield does not begin automatically, use Windows Explorer to navigate to
the CD drive, then double-click Honeywell IP Utility Setup.exe.
2.
Follow the steps in the InstallShield wizard.
3.
Click Finish to close the InstallShield wizard and complete the installation process.
4.
Once the installation is complete, a Honeywell IP Utility icon (
desktop. Double-click the icon to launch the IP Utility.
Note
If Bonjour is not detected on the target computer then it will automatically be
installed during the IP Utility installation.
The IP Utility can be removed:
•
Using the Start Menu
•
Using the Control Panel
Note
When removing the IP Utility, you are given the option to uninstall Bonjour
with the IP Utility.
) appears on your