Connecting To Devices; Configuring Ip Network Settings - Honeywell HD4DIP Reference Manual

Connecting to Devices

Configuring IP Network Settings

Document 800-00249 Rev C
08/08
Note Contact your network administrator if you have any questions regarding your
local area network (LAN) or any other network related issues.
Before configuring the IP network settings and changing the password, you must connect
to the HD4DIP(X) device.
To Connect to a Device
• In the Discovery pane, double-click the device.
OR
• On the left pane, select the device, and then click
connected device are displayed in the System pane.
To Disconnect from a Device
On the Discovery pane, select the device, and then click
Note When you see the Limited/No connectivity icon (
connect to the device because of network related issues. Check your network
settings to resolve the issue.
The IP network setting details such as device name, IP address, and subnet mask can be
configured for each connected device.
Updating IP Network Settings Automatically
To update the IP network settings of a device automatically:
1. In the Discovery pane, select the device and click
2. Select Obtain an IP Address automatically. Enter the Device Name.
3. Click Apply. The available IP address, subnet mask, and default gateway are
assigned to the device from the network server automatically.
HD4DIP Network Camera Reference Guide
. The network settings for the
.
), you cannot fully
. Select the System tab.
37