Configuring Network Settings
Connect /
disconnect icon
Discovery icon
Limited or No
connectivity
The Discovery pane lists
the IP devices found on the
network and enables the
user to connect to them.
Configuring the HD4DIP(X) IP Network
Discovering Devices
36
Figure 3-3
IP Utility User Interface
When you log on to the IP Utility, the devices on the network — including the devices on
other subnets — are automatically discovered and are listed in the Discovery pane. After
the initial discovery, auto-refresh continues to discover devices that are newly added or
removed from the network.
You can also manually refresh the device discovery by clicking the Discovery icon (
located near the top of the Discovery pane.
Note
The Multicast protocol needs to be enabled in the LAN (router/switch) to
discover the devices beyond the subnet.
The About menu on the Title bar
provides information on which version
of software is being used.
The Status bar indicates which user is logged
in and how many devices have been found on
the network, and the status of the connection
and operations performed after connecting.
The System tab allows you
to edit network settings and
perform firmware upgrades.
),