Playing Back Clips - Panasonic AJ-PD500P Operating Instructions Manual

Playing Back Clips

Playback
Before you start playback, set the playback frequency, for-
mat, and other settings in the menu. (➝ Setup Menu "SYSTEM
MODE" page 105)
2
1
Press the [PLAY]
Playback begins. Clips play back in the order they were
recorded.
Note:
• Pressing the [REW]
button rewinds playback, while pressing the [FF]
fast forwards playback.
• Video and audio playback may be disrupted between clips
in different video formats (1080i, 1080p, etc.) or compres-
sion formats.
• When clips with the same video format but different audio bit
rates are played back continuously, the audio between clips
will be muted.
2
Press the [STOP]
Playback stops and the input video (EE) is displayed.
Note:
To show the image where playback stopped (PB image), set
the "STOP EE SEL" (➝ page 87) menu item to "PB."
Adjusting the playback audio levels
Follow the procedure below to change the playback levels.
1.
Press the [AUDIO LEVEL-PB] button.
The playback volume appears.
2.
Turn the multi control dial.
The levels of all channels can be adjusted.
Note:
Operation is also possible with the up and down cursor but-
tons.
3.
Use the left or right cursor button to select an audio
channel.
The selected channel number flashes. Each of the chan-
nels can be adjusted.
4.
After adjustment is finished, press the [AUDIO LEV-
EL - PB] button or [EXIT] button.
The setting values are saved and the displayed informa-
tion disappears.
30
Main Mode: Recording/Playback Screen
1
button.
button instead of the [PLAY]
button.
Note:
• The setting values do not change when you turn off the pow-
er.
• If you press the multi control dial during the changing of the
volume levels, the default values are restored.
Variable speed playback
The playback speed can be varied to search for a scene.
1
Press the [SEARCH] button during STOP/STILL/
PLAY.
The mode becomes STILL (SHTL 0.0) and a still image is
button output.
2
Turn the multi control dial to change the playback
speed.
The speed changes in accordance with how much the dial
is turned.
• Audio is not played back at speeds faster than 10 times nor-
mal speed.
• Turning the dial clockwise changes the speed in the for-
ward direction and turning it counterclockwise changes the
speed in the backward direction.
• Press the [PAUSE] button to set the speed to the 0 state. To
return to normal playback, press the [PLAY]
• When the multi control dial is pressed in variable speed
mode, the JOG lamp lights and the mode becomes JOG
mode. Variable playback is performed in accordance with
the speed at which the dial is turned.
2
1
button.