Panasonic AJ-PD500P Operating Instructions Manual page 37

• Pressing the [STOP]
playback and redisplays the thumbnail screen.
• When playback is stopped, the cursor moves to the clip
played prior to stopping.
• Video and audio playback may be disrupted between clips
in different video formats (1080i, 1080p, etc.) or compres-
sion formats.
• When clips with the same video format but different audio bit
rates are played back continuously, the audio between clips
will be muted.
• Changing the thumbnail screen to text memo display allows
you to start playback from a text memo position.
• You can select the playback start position for playback from
thumbnails in the "PB POSITION" (➝ page 84) menu item.
Playing back one clip (ONE CLIP PLAY)
When "ONE CLIP PLAY" is assigned to a [USER] button,
pressing the [USER] button plays only the clip at the cursor
position.(➝ "USER BUTTON" page 99)
Note:
• When the thumbnail screen is redisplayed after one clip play-
back ends, the cursor moves to the next clip.
• All buttons except the [STOP]
one clip playback.
• One clip playback starts from the position set in the "PB POSI-
TION" (➝ page 84) menu item.
• When JOG/SHTL is used to display a still image during play-
back from the thumbnail screen, the [USER] button to which
"ONE CLIP PLAY" has been assigned allows you to play to the
end of the clip from the position of the still image.
• One clip playback is also performed when the [PLAY]
ton is pressed while holding down the [SHIFT] button.
Using variable speed playback and frame-
by-frame playback
Operation is the same as in the recording/playback screen.
(➝ "Variable speed playback" page 30, "Frame-by-frame
playback" page 31)
Playing back from a text memo position
1
Select "TEXT MEMO CLIPS" in the "REPOSITION"
(➝ page 82) menu item.
The thumbnails of clips with text memos are displayed at
the top of the LCD monitor. Information on the clip text
memo selected with the cursor is displayed at the bottom
of the LCD monitor.
button during clip playback stops
button are disabled during
Thumbnail Blue indicates selected
display number of text memo clips
and white indicates total
number of text memo clips.
Note:
• When a text memo clip with different settings for the "SYS-
TEM MODE" (➝ page 105) menu item is displayed,
may be displayed instead of the thumbnail for the text memo
position displayed at the bottom.
2
Select the clip with a text memo that you want play
and press the [SET] button.
The cursor moves to the bottom of the LCD monitor.
but-
3
When the cursor is at the bottom, use the left or right
cursor button to align the cursor with the thumbnail
with a text memo that you want to play and then
press the [PLAY]
The clip is played back from the time code position of the
text memo selected with the cursor. When you press the
[STOP] button to stop playback or when playback
stops upon reaching the end of the clip, the thumbnail
screen reappears and the cursor returns to the thumbnail
of the text memo where playback was started. Press the
[EXIT] button to return the cursor to the top of the thumb-
nail screen.
Note:
All buttons except the [STOP]
playback.
Indicates still images
included with the text
memos.
The cursor moves.
button.
button are disabled during
Main Mode: Thumbnail Screen
37