Panasonic AJ-PD500P Operating Instructions Manual page 98

EXT DC IN
Item
Sets the remaining level detection type for when an external DC power supply or battery is
connected to the DC IN connector. Set NEAR END and END of TYPE A and TYPE B to match
EXT DC IN the battery that is to be used.
SELECT DC PWR SUPPLY
TYPE A
TYPE B
Sets the voltage (in 0.1 V steps) at which to display warning information when the voltage
drops for the battery to be used as "TYPE-A" selected in the "EXT DC IN SELECT" menu
item.
TYPE A NEAR END
10.6 V to 12.9 V to 15.0 V
Note:
A voltage that will be lower than END cannot be set.
Sets the voltage (in 0.1 V steps) at which to automatically turn off the power of the unit when
the voltage drops for the battery to be used as "TYPE-A" selected in the "EXT DC IN SE-
LECT" menu item.
TYPE A END
10.6 V to 12.4 V to 15.0 V
Note:
A voltage that will be higher than NEAR cannot be set.
Sets the voltage (in 0.1 V steps) at which to display warning information when the voltage
drops for the battery to be used as "TYPE-B" selected in the "EXT DC IN SELECT" menu
item.
TYPE B NEAR END
10.6 V to 12.9 V to 15.0 V
Note:
A voltage that will be lower than END cannot be set.
Sets the voltage (in 0.1 V steps) at which to automatically turn off the power of the unit when
the voltage drops for the battery to be used as "TYPE-B" selected in the "EXT DC IN SE-
LECT" menu item.
TYPE B END
10.6 V to 12.4 V to 15.0 V
Note:
A voltage that will be higher than NEAR cannot be set.
98
Setup Menu: Menu List
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz