Table of Contents
Advertisement
Control Reference Guide
About button labels: Orange labels indicate alternate functions enabled by simultaneously pressing the [SHIFT] button.
<Example> Press the [SHIFT] and [REMOTE/MODE] buttons simultaneously to execute the [MODE] button function.
1.
REMOTE,
MODE
button
[REMOTE] button:
This button switches to the mode for controlling the unit
from the REMOTE connector.
When the unit can be controlled from the REMOTE con-
nector, the lamp on the left is lit.
[MODE] button:
This button switches to USB device mode (USB DEVICE)
or AVCHD playback mode.
(➝ "USB Device Mode" page 64, "AVCHD Playback
Mode" page 65)
2.
COUNTER button
This button switches the counter display in the following
order.
TC➝UB➝CTL➝TC
(➝ "Time Code, User Bits, and CTL" page 77)
3.
RESET button
When the counter display on the display panel is CTL,
press this button to reset the counter display to
"0:00:00:00".
(➝ "Time Code, User Bits, and CTL" page 77)
4.
TC PRESET button
This button sets the TC or UB value.
(➝ "Time Code, User Bits, and CTL" page 77)
14
Control Reference Guide: Controls
Controls
5
1
2 3 4
12
13
14
6
20 7 9 8
15
16
17
18 11 19 10
5.
AUDIO LEVEL buttons
[AUDIO LEVEL-REC] button:
This button displays the recording audio level adjustment
screen.
(➝ "Recording Clips" page 27)
[AUDIO LEVEL-PB] button:
This button displays the playback audio level adjustment
screen.
(➝ "Playing Back Clips" page 30)
6.
USER 1-3,
4-6
buttons
Users can assign any functions to these buttons.
(➝ "USER BUTTON" page 99)
7.
THUMBNAIL button
This button displays or hides the thumbnail screen.
(➝ "Displaying the Thumbnail Screen." page 32)
8.
SHIFT
button
Hold this button while pressing another button to perform
the assigned function of that button.
Advertisement
Table of Contents
