Table of Contents
Advertisement
Item
Sets whether HD SDI output has the phase advanced 90H in relation to the SD reference
input when there is an SD reference input.
0H: Outputs with the same phase as the SD reference.
HD SYS H
90H: Outputs with the HD SDI output phase advanced 90H from the SD reference output.
ADVANCE
Note:
Audio and time codes are output with the same phase as HD SDI output.
Selects the reference for video output.
AUTO:
Uses the signal input to the REF connector as the reference. When there is no input to the
REF connector, the selected video input signal is used as the reference. When there is no
REF input signal and no VIDEO input signal, the internal clock is used.
OUTPUT REF
REF:
Uses the REF input signal as the reference. If there is no such signal, the internal clock is
used.
INPUT:
Uses the VIDEO input signal as the reference. If there is no such signal, the internal clock is
used.
HOURS METER
Item
OPERATION
Displays the total time that the power of the unit has been on.
P.ON TIMES
Displays the total number of times that the power of the unit has been turned on.
LCD
Displays the total time that the LCD monitor of the unit has been lit.
FAN
Displays the total time that the fan of the unit has been rotating.
VERSION
Displays the various versions of the unit.
Item
VERSION
Displays the overall firmware version (representative version) of the unit.
MODEL NAME
Displays the model name of the unit.
SERIAL NO.
Displays the serial number of the unit.
MAC ADDRESS
Displays the MAC (Media Access Control) address of the unit.
UID
Displays the unique ID of the unit.
106
Setup Menu: Menu List
Settings and brief function description
Settings and brief function description
Settings and brief function description
FREQ indications
59.94Hz
59.94Hz
50Hz
Advertisement
Table of Contents
