Table of Contents
Advertisement
Error Codes
Code No.
Displayed message
TURN POWER OFF
E-30
<P2 CARD>
TURN POWER OFF
E-31
<SYSTEM MODE>
SYSTEM ERROR
E-35
<CODEC>
SYSTEM ERROR
E-36
<P2 SYSTEM>
SYSTEM ERROR
E-37
<P2CS>
SYSTEM ERROR
E-39
<INITIALIZE>
E-50
INPUT DC TOO LOW
OPT SYS ERROR
<SYSTEM>
E-55
<NOT RESPONSE>
<HALT>
Display of warning information
When a warning occurs, a message is displayed on the OSD display and information display.
Displayed message
CANNOT REC
CANNOT LOOP REC
Displayed when an error occurs in reading and writing card
data.
To continue operation, turn the power off and then back on.
System mode error
To continue operation, turn the power off and then back on.
CODEC microprocessor error
To continue operation, turn the power off and then back on.
P2CS microprocessor error (error notification)
To continue operation, turn the power off and then back on.
P2CS microprocessor error (communication disconnected)
To continue operation, turn the power off and then back on.
Video initialization error
To continue operation, turn the power off and then back on.
Displayed when the input DV voltage is below the undercut
voltage.
Displayed when an error occurs with the system of the
AVCHD codec board AJ-YCX500G (option). To continue op-
eration, turn the power off and then back on.
Description
Displayed when data cannot be recorded on a P2 card.
[Cause]
• The card is write protected.
• No more free space on the card.
• Recording was attempted on a card that cannot be used.
• Card status changed during recording.
• Recording was attempted when the unit was BUSY.
Displayed when data cannot be recorded to a P2 card while the "RECORD-
ING" (➝ page 86) menu item is "LOOP."
[Cause]
• The card is write protected.
• No more free space on the card.
• Recording was attempted on a card that cannot be used.
• Card status changed during recording.
• Recording was attempted when the unit was BUSY.
For Long and Trouble-Free Operation: Warning System
Description
Operation
Card removal
error
System error
System error
System error
System error
Video
initialization
error
Low voltage
System error
Deck operation
STOP
STOP
111
Advertisement
Table of Contents
