Panasonic AJ-PD500P Operating Instructions Manual page 92

VIDEO
Item
Selects the video input signal.
HD SDI: Selects the SDI connector (HD signal input).
SD-SDI: Selects the SDI connector (SD signal input).
INT SG:
Selects the internal signal generator. The signal switches to the internal signal selected in
INPUT SEL
the INT SG menu item.
Note:
• When "SD SDI" is selected for the signal format of the "LINE&FREQ" setting, the signal
is up converted automatically to HD and recorded.
• When 1080P is up converted from an SD signal, the video will not be converted properly.
Sets the internal signal type. SMPTE and ARIB signals are enabled only when the
"LINE&FREQ" setting is set to the HD format (black in SD mode).
100%CB: 100 % color bar
INT SG 75%CB: 75 % color bar
SMPTE: SMPTE color bar
ARIB: ARIB color bar
BLACK: Black
Switches to the function for displaying a square that automatically changes its position on
the INT SG.
SG MOVE
ON: Displays.
OFF: Does not display.
Sets whether to record the WIDE information when "LINE&FREQ" is set to "480-59.94i" or
"576-50i."
WIDE SEL
WIDE: Records the information.
NORMAL: Does not record the information.
Switches the setup. (When 480-59.94i only)
* 1
SETUP(7.5%) ON : Switches to the 7.5 % setup.
OFF : Turns off the 7.5 % setup.
Selects whether to superimpose EDH on SD SDI output signals.
EDH(SD) ON: Superimposes EDH.
OFF: Does not superimpose EDH.
Selects the video signal output from the video output connector.
AUTO:
Switches output automatically in accordance with the current recording and playback for-
mat.
• When 59.94 Hz is set
1080p: 1080/59.94p
1080i: 1080/59.94i
480i: 480/59.94i
• When 50 Hz is set
OUTPUT FORMAT
1080p: 1080/50p
1080i: 1080/50i
576i: 576/50i
Note:
• When other than "AUTO" is selected, a signal that differs from the recording and play-
back format is automatically converted before output.
• When 1080P is up converted from an SD signal, the video will not be converted properly.
• When an SD signal is output, the 480/59.94p or 576/50p signal is output from the HDMI
output connector.
Selects the 3G-SDI output format for when "LINE&FREQ" (➝ page 105) is "1080-59.94P" or
"1080-50P."
3G-SDI OUT
LEVEL-A: Selects the 3G-SDI LEVEL-A format.
LEVEL-B: Selects the 3G-SDI LEVEL-B DL format.
*
1
This menu is only for the AJ-PD500P
92 Setup Menu: Menu List
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz