Table of Contents
Advertisement
Item
Message
MISSING CLIP!
NO CARD!
NO FILE!
NO COPY TO SAME
CARD!
NO INPUT!
NO SD CARD!
NOT SELECTED!
Thumb-
nail
SAME CLIP IS
SELECTED!
TOO MANY CLIPS!
UNKNOWN CONTENTS
FORMAT!
UNKNOWN DATA!
USER CLIP NAME
MODIFIED!
WRITE PROTECTED!
Description
A shot mark cannot be added to a clip that spans
multiple P2 cards if all of the segments are not
available.
No P2 card or SD memory card is inserted.
The designated file does not exist.
Copying is not possible because the copy
source and copy destination are the same.
No data is input.
No SD memory card is inserted.
An attempt was made to delete when no clip was
selected.
The selected clips contain multiple copies of the
same clip (duplicated by copying).
Too many clips are selected.
This warning is for when the version of the con-
tent is not compatible with the unit.
• The metadata character code is invalid.
• There is a problem with the data in the file.
Characters need to be deleted when the counter
value is added to the clip name.
The P2 card or SD memory card is write protect-
ed.
Insert all of the P2 cards on which the clip was record-
ed.
Insert compatible media.
Check the file.
Copy to a card that does not contain the selected
clip.
Input data and then set the setting.
Insert an SD memory card.
Select the clip you want to delete.
Multiple copies of the same clip (duplicated by copy-
ing) cannot be simultaneously copied. Deselect all of
the selected clips that are identical copies.
Reduce the number of selected clips.
Match the device and content versions.
• Use UTF-8 for the metadata character code.
Use the viewer to enter the correct characters.
• Create the file again.
Only up to 100 bytes can be saved for the combina-
tion of the user clip name and counter value so char-
acters are deleted automatically when the total
exceeds that amount.
Insert write-enabled media.
For Long and Trouble-Free Operation: Warning System
Measure
115
Advertisement
Table of Contents
