Panasonic AJ-PD500P Operating Instructions Manual page 96

Item
DHCP Automatically sets the network settings by DHCP.
ENABLE: Uses DHCP (automatic assignment)
DISABLE: Enter the settings without using DHCP (automatic assignment).
When "DISABLE" is selected, the following menu items are displayed. Set the items.
IP ADDRESS: Sets the IP address.
SUBNET MASK: Sets the subnet mask.
DEFAULT GATEWAY: Sets the default gateway address.
PRIMARY DNS: Sets the address of the primary DNS server.
SECONDARY DNS: Sets the address of the secondary DNS server.
NETWORK TOOLS
LOG DISPLAY Displays the connection log.
STATUS Displays the network status.
DISPLAY
INITIALIZE Initializes various network settings to restore them to the factory defaults.
PING Checks the network connection.
DISPLAY
Item
Sets whether to output the thumbnail screen, menu screen, and other screen display to
MONITOR OUT (SDI MON connector, HDMI connector, VIDEO OUT connector) or SDI OUT
(SDI OUT 1 to 2 connectors).
OSD OUTPUT
LCD: Does not output (displayed only on the LCD monitor).
LCD&MONITOR: Outputs to MONITOR OUT.
ALL: Outputs to all of the LCD, MONITOR OUT, and SDI OUT.
Sets superimposed display for the recording or playback screen.
OSD GRADE ALL: Displays all.
NO LEVEL METER: Does not display the audio level meter.
Sets the superimposed display items.
Here, data indicates the CTL/TC/UB value selected with the [COUNTER] button.
TIME: Data
T&STATUS: Data and operating status
T&S&M: Data, operating status, clip number, video format, audio bit rate
T&REC TIME: Data and REC TIME
T&REC DATE: Data and REC DATE
T&UB: Data and user bits
However, when UB is selected with the [COUNTER] button, the time code is indicated
OSD TC SELECT
after the user bits.
T&CTL: Data and CTL
However, when CTL is selected with the [COUNTER] button, the time code is indicated
after the CTL data.
T&T: Data and time code
Note:
• When "T&S&M" is set, an error message appears in the superimposed display if a warn-
ing or error occurs.
Selects waveform and vector monitor display.
WAVE: Waveform display
WFM TYPE
VECTOR: Vector display
OFF: Does not display.
96
Setup Menu: Menu List
Settings and brief function description
Settings and brief function description
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz