Additional Functions; Start Time / Finish - Miele DGC 6800 Operating And Installation Instructions

Additional functions

Start time / Finish

Entering settings
To change a setting
48
You can delay the start of a programme. The oven will then
switch on automatically.
Delay start cannot be used for running the descaling
programme.
Use "Start at" to enter the time of day at which you want the
programme to start. Use "Ready at" to enter the time of day at
which you want the programme to end.
The difference between the start and finish time is the
cooking duration selected plus the heating-up time which the
steam oven calculates.
If the temperature in the oven is too high, e. g. just after
another programme, you will not be able to use this
function. "Start at" / "Ready at" will not appear in the display
if this is the case.
Open the oven door until the appliance has cooled down.
Cooking results can be impaired if there is a long delay
between the food being placed in the oven and the start of
cooking.
Fresh food can change its colour and even deteriorate.
^ Select the function, temperature and duration in the normal
way.
^ Select "Open further settings".
^ Then select "Start at" or "Ready at" and enter the time you
want the cooking programme to begin or end at.
^ Confirm with "OK".
^ Select "Change".
^ Select "Start at" or "Ready at".