Item
Parallel interface
IPU external
interface
Serial interface
Extension terminal
Internal trigger
Measurement
start input
External trigger
Power supply input
Parallel interface
Control function
Lighting
Number of control
control
Control port
Power supply voltage / power
consumption
Operation ambient
temperature / atmosphere
Storage ambient temperature /
atmosphere
Outside dimension/weight
USB host
HMI External
LAN
interface
Image output
Operation input
Image output
Cameras to be connected
* Both can be used at the same time, but touch panel overrides the USB mouse.
**When this is used with the IV-08MP LCD monitor as one unit, temperature should be 0 to 40°C.
Input 16 points (X0 to X15) 12/24V DC 7mA (24V DC)
Output 16 points (Y0 to Y15) 12/24V DC 80mA (open corrector)
RS-232C/RS-422 (2-wire system/4-wire system) (2.4 to 115.2kbps)
upward calculator, PLC
RS-232C/RS-422 (2-wire system only) used for lighting control
CCD trigger
Trigger input (parallel interface), serial trigger, and manual trigger
(for testing)
+24V, 0V
FG
Input common 1 point
Interrupt input (trigger) 1 point
Input 15 points
Output common 1point
READY 1 point
HALT output 1 point (interlocking with watchdog timer)
Output 16 points
Dimmer function, lamp ON/OFF (LED), shutter ON/OFF (halogen)
4 systems, 2 controls/1 system
RS-232C/RS-422
24V DC (±10%) 30W
0 to 45°C / 35 to 95% RH (no condensation)**
-20 to 70°C / 35 to 95% RH (no condensation)
81mm (W) × 176.4mm (H) × 126.4mm (D)
(protruding portions are not included)
USB 1.1 specification, 2 channel (power supply capacity 100mA / ch)
10/100 base-TX
VGA output port 1 point, IV LCD monitor output 1 point
Touch panel, and commercially available USB mouse (*)
SVGA (800 × 600 × 24bpp) analog output
IV LCD monitor (800 × 600 × 18bpp) digital output
IV-S30C1, IV-S30C2, IV-S30C3, and IV-S30C4
5 - 3
Specifications