Sharp IV-S51M Instruction Manual page 40

4) Parallel input instruction: codeF004
• Output the preset data (ON/OFF) to the parallel I/O terminal block (16 terminals).
[Command]
: Station No. F
• Output data D0 to D15: 0 = OFF, 1 = ON
[Response]
: Station No. F 0
5) Setting gain/offset: code F005
• Change the gain (contrast) and the offset (brightness) of the specified camera
[Command]
: Station No. F 0
• Camera No.: 0 =Camera 1, 1 = Camera 2
• gain/offset setting: 0 = gain, 1 = offset
• Preset value: 0 to 255
[Response]
: Station No. F 0
H
0 0 4 D0 D1
•••
0 4 RC RC RC RC SC SC CR
(H )
••• •••
H
Preset value SC SC CR
0 5
10 2
0 5 RC RC RC RC SC SC CR
(H )
••• •••
6 - 13
D15 SC CR
•••
(H ) (L )
(L ) (H ) (L )
10 1 10 0
(H ) (L )
(L ) (H ) (L )