Sharp IV-S51M Instruction Manual page 11

(2) Attachment at the side surface (when horizontally placed)
IV-S51M is horizontally placed and its side surface is secured to the mounting surface.
Main housing angle brackets
Attach two (2) main housing angle brackets (for the side) to the side surface of the IV-S51M with
securing screws (two each: M3×8).
(Backside)
Main housing angle brackets
Secure the IV-S51M to the mounting surface using four (4) mounting holes of main housing angle
brackets.
(A view on arrow)
Main housing angle brackets
198.4
3 - 3
A
(Front)
Securing positions of screws
(two positions at one side)
6.0
Mounting surface