4.
Specify the activation conditions.
FTP Sending : Specify the use of the FTP transfer if an event occurs.
Record : Specify the use of recording if an event occurs.
5.
When done, click [Apply].
SYSTEM SETUP
Product Information
1.
From the Setup menu, select the
<System (
2.
Click <Product information>.
3.
Check the camera information, or
provide details according to your
network environment.
Location : Specify the location where
the camera is installed.
Description : Provide detailed
information about the camera location.
Memo : Provide an explanation about the camera for better understanding.
Language : Select a preferred language for the camera menus and the Web
Viewer OSD.
4.
When done, click [Apply].
Date & Time
1.
From the Setup menu, select the
<System (
2.
Click <Date & Time>.
3.
Specify the time and date that will be
applied to the camera.
Current system time : Displays the
current time settings of your system.
Timezone : Specify the local time
zone based on the GMT.
Use Daylight Saving Time :
If checked, the time will be set one
hour before the local time zone for
the specified time period.
This option will be displayed only in areas where DST is applied.
)> tab.
)> tab.
English _83