4.5 Autoloader Settings
4.5.1 Change password
The following describes how to change the password used during login.
1) Log in.
2) Select [CONFIGURATION].
3) Select [CONFIGURE OP PANEL SETTINGS] from [CONFIGURATION].
4) Select [CHANGE LOGIN PASSWORD] from [CONFIGURE OP PANEL SETTINGS].
5) The following password input menu will appear.
Enter a new four-digit password.
6) Next, retype the password that you entered at step 5).
7) If the password entered in step 5) and 6) match, the following message will appear.
Once the above message is displayed, the new password is valid.
If the entered passwords do not match, the following message will appear.
If the above message is displayed, start again from step 4).
- 49 -