NEC LL009F User Manual page 89

(3) Loader Mode setup window
[Configure Loader] - [Loader Mode]
Function
This window is used to set the Autoloader's operation mode, I/O slot, and number of active
slots.
Information
<1> Refresh button
This displays the current setup information of this page.
<2> Loader
This sets the following Autoloader settings.
Loader mode:
For the Loader mode setting, select "Random" or "Sequential".
Loop:
This setting is enabled when in "Sequential" mode. When the last cartridges is
used while in "Sequential" mode, this sets "Automatic looping" mode so that the
first cartridge will be used next.
Enable:
Disable: Operation is not in Automatic looping mode.
Auto load:
This setting is enabled when in "Sequential" mode. When the magazine is
locked, the cartridge in the lowest-numbered slot is automatically loaded to the
drive.
Enable:
Disable: Auto load is not performed.
Number of active slots:
This can be used to set the loader's active slots. If "+1" is selected, slot 9 is
assigned to the I/O Station.
<3> Submit button
This button is used to confirm settings. When the settings are completed, a normal
end message will appear.
Operation is in Automatic looping mode.
Auto load is performed.
- 89 -
Administrator