Chapter 4 Operation Methods
This chapter describes how to use the operation panel and how to enter settings for the
Autoloader and the cartridge drive.
Settings can be entered for the Accessor and the drive only after the Autoloader has been
reset.
4.1 Operation panel
The operation panel is located on the right side of the Autoloader's front panel.
The following figures and sections describe the various components on the Autoloader's
operation panel.
Figure 4-1 Operation Panel Components
<2> <3> <4> <5> <6>
<8>
<1>
<7>
<9>
- 35 -