NEC LL009F User Manual page 70

Tape autoloader
Table of Contents

Advertisement

Slot or cartridge
[Slot N]
This section shows detailed information about the selected slot.
Slot type:
Indicates the type of slot.
(Storage, I/O station, Cleaning, Inactive)
Element address: Indicates the slot's address for reporting to the host.
[Cartridge]
Detailed information on the cartridge is displayed when a slot with a cartridge is
selected.
Cartridge label:
Shows the cartridge's bar code label. "Unknown" is displayed
when there is no barcode label.
Remain:
Indicates the number of cleaning cartridges remaining.
This is shown only when the cartridge type is "cleaning cartridge".
Caution:
The correct remaining number cannot be shown unless a cleaning cartridge
has been loaded to the drive. Note that cartridge cleaning starts
automatically when a cleaning cartridge is loaded. Users are expected to
monitor the number of times such cleaning has been used.
Media Status:
This indicates the cartridge's status. (OK, Expired, Bad media,
etc.)
<1>
Caution:
Note that the displayed slot number and the locations that can be picked
may vary greatly according to the cartridge storage status.
- 70 -
<2>

Advertisement

Table of Contents
loading

Table of Contents