Changing The Number Of User Slots; Table 4-14 Active Slots Count Setting - NEC LL009F User Manual

4.5.3 Changing the number of user slots

The Autoloader settings can be used to logically change the number of slots. This setting
method is described below.

Table 4-14 ACTIVE SLOTS COUNT Setting

9 ACTIVE + 0 I/O
8 ACTIVE + 1 I/O
8 ACTIVE + 0 I/O
6 ACTIVE + 1 I/O
6 ACTIVE + 0 I/O
4 ACTIVE + 1 I/O
4 ACTIVE + 0 I/O
The following describes the setting for six cartridges in the Autoloader's data slot, with one
valid I/O Station.
1) Log in.
2) Select [CONFIGURATION].
3) Select [CONFIGURE LIBRARY] from [CONFIGURATION].
4) Select [SET ACTIVE SLOTS COUNT] from [CONFIGURE LIBRARY].
5) Select the number of slots.
6) Once this is selected, the following confirmation screen will appear.
7) When this is completed, the screen returns to step 4).
Data slots
No. of
Valid slot numbers
cartridges
9 SLOTS 1 to 9
8 SLOTS 1 to 8
8 SLOTS 1 to 8
6 SLOTS 1 to 6
6 SLOTS 1 to 6
4 SLOTS 1 to 4
4 SLOTS 1 to 4
- 52 -
I/O Station
Invalid
Valid
Invalid
Valid
Invalid
Valid
Invalid