Handling Precautions; Use Precautions; General Precautions - NEC LL009F User Manual

6.4 Handling Precautions

The following are caution points to be noted when handling data cartridges.

6.4.1 Use Precautions

 Before using cartridges
• Open the cartridge door and make sure that the leader pin is affixed.
• Check the data cartridge to be used, making sure that it has not been dented, bent, or
otherwise damaged. Do not use damaged cartridges.
• Before using a data cartridge that has been stored in a temperature and humidity
condition outside the device's recommended range of use, wait until the use
temperature/humidity conditions meet (up to 24 hours) the use environment before
using the cartridge. If there is a large temperature difference between the storage site
and the use site, do not move the cartridge immediately into the use site. Instead, keep
the rate of temperature change within about 10°C per hour, so that the data cartridge
can gradually become accustomed to the temperature in the use environment.
 Insertion of cartridge into magazine and fixed slots
Insert the data cartridge firmly. Close the protective case of the inserted data cartridge, and
store them in a relatively dust-free environment.
 After use
Always keep used cartridges in their protective cases and store them in a relatively
dust-free environment. When stored, they can be positioned either vertically or horizontally.
 Disposal
When disposing of cartridges, observe all relevant local bylaws on product disposal.

6.4.2 General precautions

 Do not touch the tape (magnetic surface) in the cartridge.
 Do not place cartridges near magnetic objects.
 Do not leave cartridges in direct sunlight or near air conditioners or heaters.
 Do not apply strong impact to cartridges.
 Do not handle cartridges while eating, drinking, or smoking. Also, do not expose them to
paint thinner, alcohol, etc.
 Always keep individual cartridges in their cases when storing them.
 Insert cartridges into the magazine gently and precisely.
 Data cartridges are sensitive to dirt and dust, so always keep them in their protective
cases and store them in a relatively dust-free environment. When stored, they can be
positioned either vertically or horizontally.
 If a cartridge has become dirty or dusty, wipe it off gently using a soft cloth. Errors may
occur if a dirty or dusty cartridge is used.
- 111 -