Table 4-8 Configure Auto Cleaning Submenus; Table 4-9 Configure Network Settings Submenus; Table 4-10 Configure Op Panel Settings Submenus - NEC LL009F User Manual

(2) CONFIGURE AUTO CLEANING menu

Table 4-8 CONFIGURE AUTO CLEANING Submenus

Submenu
ENABLE
AUTO CLEANING
DISABLE
AUTO CLEANING
AUTO CLEANING function
Caution:
Always check whether the backup software supports the AUTO CLEANING
function.
If the backup software does not support the AUTO CLEANING function, set the
AUTO CLEANING as disabled. Problems may occur if it set as enabled.
(3) CONFIGURE NETWORK SETTINGS menu

Table 4-9 CONFIGURE NETWORK SETTINGS Submenus

Submenu
CONFIGURE
LINK SPEED
CONFIGURE
DHCP
CHANGE
IP ADDRESS
CHANGE
SUBNET MASK
CHANGE
GATEWAY
(4) CONFIGURE OP PANEL SETTINGS menu

Table 4-10 CONFIGURE OP PANEL SETTINGS Submenus

Submenu
CONFIGURE
LCD BACK
LIGHT
CHANGE
LOGIN
PASSWORD
Description
This enables auto cleaning.
For auto cleaning to be executed, an unused slot must be set in
advance.
This disables auto cleaning.
Default value Description
AUTO This sets the network's communications mode.
To use the auto setting, select "AUTO".
OFF This submenu can be used to configure the DHCP
server.
192.168.001.001 This sets the IP address for access via a network.
255.255.255.000 This enables the Autoloader to be accessed from a
subnet.
192.168.001.254 This indicates a gateway connection between
subnets.
Default value Description
ENABLE This sets the panel's contrast.
・ENABLE AUTO BACK LIGHT
AUTO
BACK LIGHT
This sets the time until the LCD back light is
automatically shut off.
・DISABLE AUTO BACK LIGHT
This disables the LCD back light auto off function.
0000 This submenu can be used to change the login
password.
- 47 -