NEC LL009F User Manual page 73

Tape autoloader
Table of Contents

Advertisement

Drive
[Drive Information]
This section shows drive information.
Status:
Indicates the drive's status. (OK, Degraded, Failed)
Vendor ID:
Indicates the LTO drive manufacturer.
Product ID:
Indicates the drive's product name.
F/W version:
Indicates the drive's firmware version.
Serial number:
Indicates the drive's serial number.
World Wide ID:
Indicates the drive's WWN.
Data Compression:Indicates the drive's compression mode
[Event]
Events such as drive errors and consumable replacement notices are indicated here.
(When there are no events, "No Data" is displayed.)
[Cartridge]
When there is a cartridge in the drive, the cartridge's detailed information is shown.
Cartridge label:
Indicates the cartridge's bar code label. If there is no bar code
label, "unknown" is displayed.
Write protect:
Indicates the cartridge's write protection status.
Media Status:
Indicates the cartridge's status. (OK, Expired, Bad Media, etc.)
Total:
Indicates the cartridge's total capacity
Used:
Indicates the cartridge's used capacity
Remain:
Indicates the cartridges remain capacity
- 73 -

Advertisement

Table of Contents
loading

Table of Contents