Call Forward - Remote; Call Forward - End Chaining - Mitel Navigator User Manual

7. Do one of the following:
• To turn Call Forward on, press the TurnOn softkey.
• To turn Call Forward off, press the TurnOff softkey.
Call Forward – Remote
To forward calls from a remote phone to your current location:
1. Press (SUPERKEY).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Next softkey until "I Am Here" appears.
5. Press the Yes softkey.
6. Dial the extension of the remote station.
7. If you make an error while dialing, use the <−−− softkey to backspace and correct the
number.
8. Press the Save softkey.
To cancel Call Forward - Remote from the phone that set the remote forwarding:
1. Lift the handset.
2. Dial **77.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward - Remote from the phone that was forwarded:
1. Press (SUPERKEY).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Review softkey.
5. Press the Change softkey.
6. Press the TurnOff softkey.
7. Press (SUPERKEY).
Call Forward – End Chaining
To ensure that calls do not get forwarded again by the destination number:
1. Lift the handset.
2. Dial *64.
3. Hang up.
To again allow calls to be forwarded by the destination number:
1. Lift the handset.
43
Call Handling