Airflow Direction Control - Daikin FTXS30HVJU Service Manual

SiUS04-924
1.2

Airflow Direction Control

Power-Airflow The large louvers send a large volume of air downwards to the floor. The louver provides an
optimum control area in cooling, heating, and dry mode.
Dual Louvers
Heating Mode
During heating mode, the large louver directs warm air straight downward and across the floor to
pervade the entire room.
Cooling / Dry Mode
During cooling or dry mode, the louver retracts into the indoor unit, allowing cool air to be blown
across the whole room.
Wide-Angle
The louvers, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
Louvers comfortable air distribution.
Auto-Swing
The following table explains the auto swing process for heating, cooling, dry, and fan modes :
 Alternative repetition of vertical and horizontal swing motions enables uniform airconditioning of
3-D Airflow
 When the horizontal swing and vertical swing are both set to auto mode, the airflow becomes
COMFORT
The louver is controlled to avoid blowing air directly on people in the room.
AIRFLOW
14
Louvers (horizontal blades) with Vertical Swing (up and down)
Cooling / Dry
15 °
25 °
50 °
60 °
(R9303)
the entire room. This function is effective when starting the air conditioner.
3-D airflow by alternating the horizontal vertical swing motions. The order of swing motion is
such that it turns counterclockwise, starting from the right upper point as viewed from the front
side of the indoor unit.
Heating
75 ° 80 °
(R9654)
Heating
30 °
40 °
75 °
70 °
(R9304)
Cooling
10 °
10 °
(R9655)
Fins (vertical blades)
with Horizontal Swing
Fan
(right and left)
15 °
25 °
75 °
70 °
(R9305)
(R1024)
Function and Control
Main Functions
(R9306)