Chapter 7—Setup Mode
Navigating in Setup Mode
Enter the Setup Mode by pressing the <Setup> key on the printer's front
panel. While going through the setup procedure, you are guided by texts
in the printer's display. You can navigate between setup menus, acknowl-
edge displayed values, select or enter new values, etc. by using the keys
on the printer's keyboard.
52
Move one step back on the same level.
Move up one level and escape without changing the setting.
Move forward on the same level.
Move down one level.
Acknowledge and move to next menu.
Exit the Setup Mode. Can be used anywhere in Setup Mode.
Intermec EasyCoder PM4i—User's Guide (IPL version)