Connections; Power; Computer - Intermec EasyCoder PM4i User Manual

Chapter 2—Installation

Connections

Power

1 Place the printer on a level surface, near an AC outlet. You should
be able to easily access the printer to load media and to remove the
printout.
2 Check that the printer is switched off.
3 Connect the power cord from the socket on the rear plate to an
electrical outlet (90 to 265 VAC).

Computer

The Easycoder PM4i is fi tted with one 9-pin D-style subminiature
(DB9) socket for the RS-232 serial interface port (see Appendix C).
RS-232 Serial Interface
Before you can use the serial interface, you may need to set up the com-
munication parameters, such as baud rate, parity, etc. as described in
Chapter 6, "Setting Up the Printer."
Optional Interface and Network Boards
Several types are available (see Chapter 9, "Options"). Refer to Appendix
C and the separate documentation delivered with the boards for connec-
tion and setup instructions.
The printer scans all communication ports for incoming data and auto-
matically switches to that port.
Switch off both PC and printer before connecting them together.
12 Intermec EasyCoder PM4i—User's Guide (IPL version)