Printhead Replacement
The printhead is subject to wear both from the direct thermal media or
ribbon and from the rapid heating and cooling process during printing.
Thus, the printhead will require periodic replacement.
Time between printhead replacements depends on the print images, the
type of direct thermal media or ribbon in use, the amount of energy to
the printhead, the print speed, the ambient temperature, and several
other factors.
While replacing the printhead, the power must be off. The
fi rmware will not detect the new printhead resistance until
the printer has been restarted.
1
Open the front and side doors.
Intermec EasyCoder PM4i—User's Guide (IPL version)
Chapter 10— Maintenance
2
Turn the printhead lift lever clockwise to
raise the printhead.
73