Default Configuration; Data Collection Settings - Intermec CK70 User Manual

Appendix A — Specifications and Default Settings
Symbology Density
DataMatrix 0.25 mm (10 mils)
0.76 mm (30 mils)
1.4 mm (55 mils)
2.5 mm (100 mils)
7.5 mm (300 mils)

Default Configuration

Data Collection Settings

142
EX25 2D Symbologies Typical Reading Distances With 0.24 cm (0.09
in) Setback
** Minimum distance depends on bar code width and scan angle.
The following tables list the default values of the configuration
settings supported on the mobile computer. If you restore the mobile
computer to factory default settings, the mobile computer uses these
values.
The settings are grouped by function and reflect the organization of
Intermec Settings. Not all of the configuration settings are listed in
this appendix. For detailed information on most of the settings, see the
Intermec Settings Command Reference
Use data collection settings to configure the imager and to configure
the bar codes that you want the imager to be able to read.
Data Collection Settings
Data Collection Setting
Enable Scanner/Camera Port
BT-Configure On Connect
Enable Magstripe Reader
Minimum Distance
15 cm (5.91 in)
25 cm (9.84 in)
**
**
20 cm (7.87 in)
Manual.
70 Series Mobile Computer User Manual
Maximum Distance
90 cm (35.43 in)
310 cm (122.05 in)
450 cm (177.17 in)
1100 cm (433.07 in)
1524 cm (600 in)
Default Value
On
Overwrite with computer
settings
Disable