Intermec CK70 User Manual page 112

Chapter 6 — Configure the Computer
98
With Microsoft as your security choice, you can configure:
• WPA or WPA2
• 802.1x
• Static WEP
Select Microsoft Security
Use the following procedure to select Microsoft security.
1 Start Intermec Settings. For help, see
on page 73.
2 Select Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security. An alert
box appears telling you that you must save your settings and reboot
the computer for the new security choice to take effect.
4 Select Yes. The computer resets and starts with Microsoft Security
as the Security Choice.
Configure WPA or WPA2 Enterprise (802.1x) Security with
Microsoft
Use these procedures to set WPA-802.1x security on your computer
with Microsoft security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Select Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, select Infrastructure.
5 For Network Authentication, select WPA or WPA2. Data
Encryption automatically defaults to TKIP for WPA and AES for
WPA2.
6 For 802.1x Authentication, select either TLS, or PEAP.
"Configure the Computer"
70 Series Mobile Computer User Manual