Intermec CK70 User Manual page 113

70 series
Hide thumbs Also See for CK70:
Table of Contents

Advertisement

70 Series Mobile Computer User Manual
7 If you selected TLS:
a Load a user and root certificate on your computer. For help, see
"Load a Certificate" on page
b Select Properties. The Certificates dialog box appears.
c Select the certificate you want to use from the list. The User
Logon dialog box appears.
d Enter a User Name and Domain and tap OK.
e Tap OK to exit the Certificates dialog box.
f
Press OK to save the Microsoft Security settings.
8 If you selected PEAP:
a Load a root certificate of the authentication server on your
computer. For help, see
b Press OK to save the security settings and the User Logon dialog
box appears.
c Enter a User Name, Password, and Domain. Select Save
Password if you want to save the password for future
authentication sessions.
d Press OK to save the Microsoft Security settings.
Enable WPA or WPA2 Personal (PSK) Security with Microsoft
Use the following procedure to enable WPA-PSK with Microsoft
Security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Select Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, select Infrastructure.
5 For Network Authentication, select WPA-PSK. Data Encryption
automatically defaults to TKIP for WPA and AES for WPA2.
Chapter 6 — Configure the Computer
102.
"Load a Certificate" on page
102.
99

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ck70niCk71Ck71niCn70niCn70eCn70eni ... Show all

Table of Contents