Carrier
Activation Method
Sprint
Activation Wizard
•
Verizon
•
70 Series Mobile Computer User Manual
The carrier requires the Mobile Equipment Identifier (MEID) to start
the activation process. You can find the MEID:
•
on a label located in the upper right corner of the battery
compartment.
•
on the outside of the computer shipping box.
•
in the Version Information menu. Tap Start > Settings >
Personal > Phone > Version Information tab.
The activation process is slightly different for each CDMA carrier.
Your carrier sales contact and an Intermec representative can guide
you through the process.
After you supply the MEID to your carrier, they will respond with
values that you must enter using the Windows Mobile Activation
Wizard (if required). Some of the supported carriers do not require you
to enter any values. The following table shows the carriers, the correct
activation method to use, and the values that you need to activate your
phone.
Values Required for CDMA Phone
Dial *22899
Activation Wizard
After activation, the settings are permanently stored in the CDMA
module. Changing the OS loads will not affect any of the settings or
activation parameters stored in the WAN modem.
Activation Values You Need
•
Master Subsidy Lock (MSL) or activation code
•
MDN
•
MEID
None. All parameters are automatically
transferred wirelessly.
Chapter 3 — Use the Phone
55