Intermec PB21 User Manual page 82

Appendix A — Specifications
70
• Black marks can be sensed on the front side of the media.
• You can use higher caliper media in the printer, but print quality
will be reduced.
• Receipt roll stock media has an end of roll indicator. The end of
roll indicator is a red marking (on last 3 feet of roll) on the
thermally sensitive side of the paper.
External Fanfold Media Specifications
Stack height: 70 mm (2.75 in)
Page length: 152 mm (6 in) to 305 mm (12 in)
Note: A 6-inch page length is supplied in 12-inch long stacks (two
6-inch stacks of equal height with the bottom page linked).
Specialty media is required for unique customer environments,
including printer operating temperature extremes. Intermec
recommends that you test the media in your application.
Supported Media
The printer supports tag, and receipt media. Receipt media is
supported in both a top coated and an uncoated paper in continuous
roll stock only.
The default media sensitivity number is: 180.
Use the following table as a guide when setting sensitivity numbers.
Recommended Media Sensitivity and Constant
Sensitivity Constant Description
North America Receipt Media
401 85
102 32
101 30
104 80
103 100
Duratherm TC
Duratherm NTC - 2
Duratherm NTC
Duratherm Receipt - Fanfold
Duratherm Linerless
PB21 and PB31 Mobile Receipt Printer User's Guide