Changing Configuration Settings From The Display - Intermec PB21 User Manual

Mobile receipt printer
Hide thumbs Also See for PB21:
Table of Contents

Advertisement

Changing Configuration Settings From the Display

PB21 and PB31 Mobile Receipt Printer User's Guide
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
Options in Extended Test Mode
Function
Select Media
Test Labels
Dump Mode
Factory Default
Exit to Setup
Exit
You need to enter Setup mode before you can change configuration
settings. For more information on entering Setup mode, see
"Understanding Setup Mode" on page
The top levels of the Setup menu are organized in a one-way loop.
Each level has several sub-levels.
Description
This option is almost the same as the process in Test
mode, except that the printer performs a slow test
feed in Extended Test mode. This enables the printer
to perform a slow sensor calibration which can help
resolve mark detection problems.
This option allows you to print test labels one at a
time. Press
to print the next label.
This options enters Dump mode. For more
information on Dump mode,
Communication Problems" on page
This option restores the factory default settings. Press
to select this option and then follow the
instructions on the screen.
This option exits Extended Test mode and puts the
printer in Setup mode.
This option exits Extended Test mode
see
"Troubleshooting
60.
21.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pb31

Table of Contents