Intermec PB21 User Manual page 21

PB21 and PB31 Mobile Receipt Printer User's Guide
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
3 Press to enter the Print Defs menu system.
4 Press until you reach CMD Language.
5 Press to enter the CMD Language menu system.
6 Press until you see the language of you want to select.
7 Press to select the language.
8 Cold boot the printer:
a Remove the printer battery.
b Replace the printer battery.
c Turn the printer on.
To change the printer language using the display and IPL
1 Press the Setup button. The Setup menu system appears.
2 Press until you reach Test/Service.
3 Press to enter the Test/Service menu system.
4 Press until you reach CMD Language.
5 Press to enter the CMD Language menu system.
6 Press until you see the language of you want to select.
7 Press to select the language.
8 Cold boot the printer:
a Remove the printer battery.
b Replace the printer battery.
c Turn the printer on.
To change the printer language using the display and ESC/P
1 Make sure the printer is in Ready mode.
2 Turn the printer off.
3 Open the media door.
4 Press and hold the Feed and Power buttons until the display
shows "Close Printer Door."
5 Press until you reach CMD Language.
6 Press .
9