Names And Functions Of Parts - Kenwood VR-507 Instruction Manual

Speaker Indicator
Frequency display,
Input display,
PRO LOGIC
rndicator
DIGITAL Indicator
CLIP Indicator
MUTE rndicator
Speaker selection rndicators
DOWNMIX Indicator
L
c
MONITOR Indicator
DSP Indicator
Input channel jndicators
Output channel Indicators
-:r,-::;
3 STEREO Indicator
Display STEREO Indicator
0 POWER key (For KRF47050D) -Q$$
Use to turn the maln power ON/OFF
Q ON/STANDBY ( 1/6 ) key
-aI
(For KRF47050D)
Use to switch the power ON/STANDBY when
the POWER IS turned ON.
STANDBY Indicator
0 POWER (
I/& )
key (For VR-507) -@Z!
Use to turn the power ON/STANDBY
STANDBY Indicator
Q MULTI CONTROL knob
-Liz
Use to control a variety of settings.
0 SET UP key
-LiEI
Use to select the speakers' settings etc.
0 Surround Indicators
DTS Indicator
-m
Lights when the receiver
IS
in the DTS mode.
DOLBY DIGITAL Indicator
-El
Lights when the recerver IS in the Dolby Digital
mode.
PRO LOGIC Indicator
-m
Lights when the receiver IS in the PRO LOGIC
mode.
3 STEREO Indicator
-m
Lights when the receiver IS In the 3 STEREO
mode.
CS 5.1 Indicator
-El
Lights when the receiver
IS
in the CS 5.1 mode.
Q INPUT MODE key
-m
Use to switch between the digital and analog
Inputs.
Q DIMMER key
-@J-m
Use to adjust the brrghtness of the display.
Use to select the REC MODE.
Q MONITOR key
-m
Use to monitor the source that
IS
connected to
the MONITOR tack.
0 VOLUME CONTROL knob
@ PHONES lack
:g
Use for headphone listening.
@ SPEAKERS A/B keys
-m
Use to turn the A/B speakers ON/OFF
G SOUND key
-m
Use to adjust the sound quality and the ambr-
ence effects.
0 BAND key
-Liz!
Use to select the broadcast band.
Q AUTO/CINEMA EQ. key
Use to change "TAPE" indication to "MD"
Use to select the auto tuning mode.
:g
Use to switch the status of CINEMA EQ. -m
@ LISTEN MODE key
-m
Use to select the listenrng mode.
8 MEMORY key
-m
Usetostoreradio stations Inthe preset memory.
Q SOURCE DIRECT key
-La
Use to pass the source material directly to the
amplifier.
@ INPUT SELECTOR knob
-La
Use to select the input sources.
@ AV AUX (S VIDEO, V, AUDIO L/R) jacks
-m
When standby Indicator
IS
lit, this recerver
IS
rn standby mode and consumes a small amount of curent for back-up. This system can be switched on using
remote controls.