Names And Functions Of Parts; Main Unit - Kenwood VRS-5100 Instruction Manual

Names and functions of parts

Main Unit

Listen Mode
indicators
DOLBY DEX
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
ACTIVE EQ.
indicator
1
!
1 ON/STANDBY
Use to switch the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 Surround LED (light-emitting diode)
indicators
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
PRO LOGIC mode LED indicator
Lights when the receiver is in the PRO LOGIC
mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL mode LED indicator
Lights when the receiver is in the Dolby
Digital mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote control unit.
6
EN
DIGITAL
MUTE
indicator indicator
NEO:6 DSP TS MUTE
Frequency display,
Input display,
Preset channel display,
Surround display
0 9 8 7
key
PTY
indicator
Sleep RDS
indicator indicator
DIGITAL RDS PTY ST.
Display
2
3 INPUT SELECTOR knob
$
Use to select the input sources.
4 VOLUME CONTROL knob
5 LISTEN MODE key
Use to select the listening mode.
6 AUX (VIDEO, AUDIO L and AUDIO R) jacks
*
7 MULTI CONTROL ∞¥5 keys
Use to control a variety of settings.
8 SETUP key
∞
Use to select the speakers' settings etc.
9 BAND key
∞
Use to select the broadcast band.
0 ACTIVE EQ key
Use to select ACTIVE EQ setting.
! PHONES jack
∞
Use for headphone listening.
Stereo
TUNED
indicator
indicator
TUNED
L
C R
AUTO
Input channel
LFE SW
FM/AM
indicators
kHz
LS S BS RS
MHz
AUTO indicator
Band indicators
3 4
6
&
&
∞
#
$*
$
(
*
*
5