Dvd 6-Channel Playback; Convenient Functions - Kenwood VR-507 Instruction Manual

D VD 6-channel playback
Usrng a DVD player or the like equrpped with SIX (5.1) output channels and
the recerver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital such as DTS CD, no
sound IS produced or, norse may be heard. To avoid thus situation, make
sure that you connect the component to the recerver's DVD/Gch. INPUT
jacks through a surround processor whrch can decode the surround
srgnal you want to listen to.
Connecting a DVD player whrch can decode the surround srgnal itself is
also acceptable.
INPUT MODE INPUT SELECTOR
Preparations
DVD
RC-R0720
l
Connect your DVD player to the DVD/Gch jacks of the recerver.
l
Turn on all other components that will be used.
l
Complete "Prepanng for surround sound"
4232
q
Select "DVl7/6ch" as the input source.
l
If speaker system 6 IS on when "DVD/Gch" IS selected as the Input
source, it switches off and speaker system A turns on automatically.
a Select "6ch INPT" by pressrng the INPUT MODE key.
fl Start playback of the DVD software.
q
Adjust the volume.
l
It IS not possible to adjust the volume level or sound quality
(SET UP,
SOUND)
of the channels separately when the recerver IS rn the DVDI
6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer usrng the subwoofer's own volume control.
MULTI CONTROL
SOUND
RC-ROM3
u
RC-R0720
You can makefurtheradjustments to the sound while listenrng to playback
In the surround mode.
0 Press the SOUND key until the desired item appears m the
display.
Each time you press the button, the menu changes as follows:
Note that some items are not displayed m certam modes.
I
0
BASS
(low frequency range sound quality adjustment
PCM and analog stereo mode only)
-m
0 TREB (hrgh frequency range sound quality adjustment
PCM and analog stereo mode only)
-a
@ C (center speaker level adjustment)
@ SR (right surround speaker level adjustment)
&I
SL
(left surround speaker level adjustment)
@
SW
(subwoofer level adjustment)
0 INPUT (input level adjustment - analog mode only) -a
@
NIGHT
(mrdnrght mode on/off - Dolby Digital mode only)
@ CINEMA
or
MUSIC
(Circle surround mdde only)
@J PANORAMA
(panorama mode on/off)
0 DIMENSION
(dimensron adjustment)*
@ CENTER WIDTH
(center width adjustment)
* Pro Logrc II MUSIC mode only
0 Use the MULTI CONTROL knob or keys to adjust the setting as
desired.
l
The adjustment item IS displayed for approxrmately 8 seconds.